Chassis / Engine Electrical Ground; Throttle Pedal Inspection - Polaris RANGER 1000 2020 Service Manual

MAINTENANCE
CHASSIS / ENGINE ELECTRICAL
GROUND
1. Remove the passenger seat base and storage bin to
access the chassis ground terminal
to the battery.
2. Inspect the engine ground terminal, attached to the
upper starter mounting bolt. The other end of the
engine ground cable is attached to the chassis
ground terminal.
3. Inspect the front vehicle ground
hood.
4. Remove and clean all ground terminals as necessary.
5. Ensure all chassis grounds are properly torqued.
TORQUE
Chassis Ground:
8 ft-lbs (11 Nm)
2.64
q
, located next
w
located under the

THROTTLE PEDAL INSPECTION

Inspect the throttle pedal
the throttle pedal returns normally when released. Refer
to PPS Test page procedure if experiencing a lack of
throttle response.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
w
for free movement. Be sure
© Copyright Polaris Inc.