Balance Shaft Removal / Inspection - Polaris RZR XP 1000 2014 Service Manual

k
16. Remove the eight M10
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
l j
, two M8 and one M6
ENGINE / COOLING SYSTEM

BALANCE SHAFT REMOVAL / INSPECTION

1. Perform Crankcase Disassembly / Inspection, page
3.51 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
3
w
and remove it
3.53