Balance Shaft Removal / Inspection - Polaris RANGER XP 900 2013 Manual

ENGINE
14. Remove the eleven) M6
crankcase bolts.
15. Rotate the engine so the cylinder is facing down.
16. Remove the one M6
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
3.52
g h
and two M8
j k
, eight M10 and two M8
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual

BALANCE SHAFT REMOVAL / INSPECTION

upper
1. Perform "Crankcase Disassembly / Inspection"
procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
l
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
q
and remove it
© Copyright Polaris Sales Inc.