Table of Contents
Advertisement
Installing the Chronos
Installation
Read all instructions completely before installation.
Important Installation Notes
1. Install in accordance with all national and local
electrical codes.
2. Use only the AC adapter provided by Lutron with
your Chronos System Bridge. Using an adapter not
rated at the following specifications could damage
the Chronos System Bridge and possibly overheat
the AC adapter.
• Input: 120 V
50/60 Hz
• Output: 18 V
/ 300 mA Class 2
3. Operate in ambient temperatures between 32°F
(0°C) and 104°F (40°C), 0-90% humidity, non-con-
densing.
4. To clean, wipe with a clean damp cloth. DO NOT
use any chemical solutions.
5. DO NOT ground the Chronos System Bridge. DO
NOT mount the Chronos System Bridge in a metal
enclosure.
6. Do not paint the Chronos System Bridge.
7. The range and performance of the RadioRA
System is highly dependent on a variety of com-
plex factors such as:
• Distance between system components
• Geometry of the home
• Construction of walls separating system
components
• Electrical equipment located near system
components
12
Setup Guide for the RadioRA Chronos System Bridge
System Bridge
TM
Step 1
Place the Chronos System Bridge in a convenient
and accessible location. Access to input and output
wiring should be considered when selecting the
mounting location. The Chronos System Bridge
should be placed in an area where it cannot be
inadvertently changed, and at a height inaccessible to
children.
Note: Master Controls and Lighting Zone Controls
must be located within 30 feet (9 m) of the Chronos
System Bridge or an Auxiliary Repeater. Auxiliary
Repeaters must be located within 60 feet (18 m) of
the Chronos System Bridge or one another. For more
information refer to "Repeater, Chronos System
Bridge, and Zone/Master Control Placement" on page
10.
Step 2
Remove the port cover from the Chronos System
Bridge by gently pulling up on the front edge to
disengage the snaps.
Attach Chronos System Bridge to wall using the wall
anchors and screws provided.
Note: For best performance, antenna
should be oriented vertically.
Find a suitable location for the
Chronos System Bridge
Mount the Chronos System
Bridge
Advertisement
Table of Contents
