Table of Contents
Advertisement
Astronomical Time Clock Programming
Creating Time Clock Scenes
Up to 13 scenes can be programmed for activation by the Astronomical Time Clock.
Step 1
Go to Manage Scenes
Main Menu
Time Clock Setup
Manage Scenes
Step 2
Set the Scene Names
From Manage Scenes, select Set Scene Names.
Select Scene to Name
1. Scene 1
2. Scene 2
3. Scene 3
4. Scene 4
Back
Use
and
to highlight a scene to name. Press
"Select" (
button) to proceed to the next step.
Set Name
Name: _ _ _ _ _ _ _ _
M o r n i n
Cancel
Use the
and
keys, or a connected keyboard, to
change the selected character. Use
move to the previous / next character. Press
"Cancel" (
button) to cancel changes. Press
"Done" (
button) to accept changes.
Select
g
Done
and
to
Setup Guide for the RadioRA Chronos System Bridge
Step 3
Assign Zones
From Manage Scenes, select Assign Zones. The list
of Time Clock scenes is displayed:
Select Scene to Assign
1. Morning
2. Scene 2
3. Scene 3
4. Scene 4
Back
Use
and
to highlight a scene. Press "Select"
(
button) to enter Assignment Mode for the select-
ed scene. The following screen will be displayed when
Assignment Mode is initiated:
Assign Zones
Entering Assignment
Mode...
Once Assignment Mode has been initiated, the follow-
ing screen will be displayed:
Assign Zones
Turn on devices to be
assigned to Morning.
Copy Button
Note: To use the Copy Button Feature, refer to pages
49-51.
Select
Continue
55
Advertisement
Table of Contents
