Table of Contents
Advertisement
Local Button Programming
Step 3
Remove Lighting Zone
Controls
Turn OFF the Lighting Zone Control(s) that
are to be removed from the ALL ON or ALL
OFF button being programmed.
Dimmer
If the wrong Lighting Zone Control is
removed from the ALL ON or ALL
OFF button, turn the Lighting Zone
Control ON to reassign it.
• Repeat Steps 2 and 3 to program the remaining
ALL ON or ALL OFF button on the Master
Control.
Switch
OR
GRAFIK Eye
Control Unit
TRON
Setup Guide for the RadioRA Chronos System Bridge
Step 4
Complete the ALL ON and
ALL OFF button programming
Simultaneously press and hold the 2nd and
4th buttons in the right most column until all
LEDs begin to flutter (approximately 3 sec-
onds).
• Repeat Steps 1 through 4 to re-program the ALL
ON and ALL OFF buttons on any additional
Master Controls.
• The local button programming is now complete.
35
Advertisement
Table of Contents
