Table of Contents
Advertisement
Local Button Programming
Step 4
Program additional buttons
Repeat Steps 2 and 3 for any additional but-
tons to be programmed.
• Proceed to Step 5 when all buttons on this
Master Control have been programmed.
Step 5
Complete assigning Lighting
Zone Controls
Simultaneously press and hold the 2nd and
4th buttons in the right most column until all
LEDs begin to flutter (approximately 3 sec-
onds).
• Repeat Steps 1 through 5 for any additional
Master Controls.
• Proceed to Setting Light Levels/GRAFIK Eye
Scene Selection for Local Buttons on page 32.
Setup Guide for the RadioRA Chronos System Bridge
31
Advertisement
Table of Contents
