Table of Contents
Advertisement
RS-232 Port Programming
Assign an Infrared Interface or RS-232
Interface to a Control Number by pressing the
Up or Down button on the interface until the
ALL ON (SCENE 16) is on the interface's dis-
play. After the ALL ON (SCENE 16) is on the
display, press and release the Select button.
If the wrong Master Control / Interface is
assigned to a Control Number, simply assign
the correct Master Control / Interface to the
Control Number.
When a Master Control is assigned, the
screen will change to:
Assign Control Numbers
Control has been assigned
successfully.
Press "Continue" (
assigning Control Numbers.
Assign Control Numbers
Control Number - - - - - -
Control is Assigned
Help
Repeat steps 2 and 3 for any remaining
Control Numbers to be assigned.
Press "Done" (
Device Number Setup.
• Master Control Numbers are now
assigned.
Setup Guide for the RadioRA Chronos System Bridge
Continue
button) to continue
1
Done
button) to return to
71
Advertisement
Table of Contents
