Table of Contents
Advertisement
Initial Chronos
Step 3b
Accept the Chronos
Configuration
Once the desired settings have been select-
ed, press "Done" (
If the Chronos System Bridge is not config-
ured to be the Main Repeater, it will present
instructions on activating into an existing sys-
tem.
Initializing System
Enter Activate Controls
Mode on any Repeater now.
Then press OK to Activate.
Cancel
Press and hold the ACTIVATE CONTROLS
button on a Repeater until the green ACTI-
VATE CONTROLS LED turns on (approxi-
mately 3 seconds).
The green ACTIVATE CONTROLS LED on
ALL Repeaters will turn ON.
System Bridge Configuration
TM
button).
Help
Setup Guide for the RadioRA Chronos System Bridge
Press OK to activate the Chronos System
Bridge.
Once the Chronos System Bridge has com-
pleted initialization, the following screen will be
displayed:
Initializing System
System initialized
successfully. Press
OK to continue.
Press OK to complete the initialization. The
Home Screen will be displayed.
19
Advertisement
Table of Contents
