Table of Contents
Advertisement
Activating the System
Lighting Zone Controls, if activated, will
flash the light(s) they control. Make note of
any Lighting Zone Controls that are not acti-
vated.
After verifying that all Master Controls and
Lighting Zone Controls are activated, press
or
on the Chronos
set Flash to No OR press and hold the
FLASH button on any Repeater until the
green FLASH LED turns off
(approximately 3 seconds).
If any Master Control or Lighting Zone Control
has not been activated, repeat Steps 1
through 5, starting on page 21.
• Master Controls and Lighting Zone
Controls are now
activated.
• Repeat Activate Auxiliary Repeaters and
Activate Controls for System 2 if the
Chronos System Bridge is set up as a
bridge.
• When both systems have been activated,
proceed to Local Button Programming
Overview on page 25.
24
Setup Guide for the RadioRA Chronos System Bridge
System Bridge to
TM
Advertisement
Table of Contents
