Table of Contents
Advertisement
Diagnostic Tools
Viewing Device Information
Device Information Mode is used to display information about system devices.
Step 1
Enter Device Information
Mode
From the Chronos System Bridge:
Main Menu
System Setup
Device Information
System Setup
Activate Controls
Address Usage
Diagnostics
Device Information
Cancel
Press "Next" (
System Bridge to enter Device Information
Mode.
Device Information
To obtain device
information, press
any device now.
Back
Step 2
Get Device Information
To display information about a particular
device, press any button on the device. The
Chronos System Bridge will update the device
information and then display the results.
Device Information
Updated!
Back
Device Information
Type - - - - Master Control
System - - - - - - - - - - - - -
Address - - - - - - - - - - - -12
Control Number - - - - - - - 2
Back
86
Setup Guide for the RadioRA Chronos System Bridge
Next
button) on the Chronos
TM
Help
Help
1
Help
Device Information Details:
Repeaters
Type
• Main Repeater or Auxiliary Repeater
System
• 1, 2, or Unaddressed
Address
• 1, 2, 3, or Unaddressed
Master Controls
Type
• Master Control
System
• 1, 2, or Unaddressed
Address
• 1-12, or Unaddressed
Control Number
• The RS232 device number used for identifying the
device to external equipment, or Unassigned.
Button Number
• 1-17
Button Type
• Local SC (Scene) or Local RM (Room)
• All On
• All Off
• Linked
• No Pgm (not programmed)
Linked To
(Note: This will be displayed only if the button type is
Linked.)
• Phantom "N" (where N is the Whole-home Phantom
Button that the Master Control Button is linked to)
Zone Controls
Type
• Zone Control
System
• 1, 2, or Unaddressed
Address
• 1-32 or Unaddressed
Zone Number
• The RS232 device number used for identifying the
device to external equipment, or Unassigned.
Advertisement
Table of Contents
