Set Phantom Button Types (Room Or Scene) - Lutron Electronics RadioRA RA-SBT-CHR Setup And Installation Manual

Whole-home/Phantom Button Programming

Set Phantom Button Types (ROOM or SCENE)

Note: If the Chronos System Bridge is not configured to bridge systems or to use RS232, Phantom Buttons are
TM
not available and this procedure does not apply.
Step 1
Set Button Types
If bridging two systems:
Main Menu
Whole-home Button Setup
Phantom Button Setup
Set Types to RM / SC
If not bridging systems:
Main Menu
Phantom Button Setup
Set Types to RM / SC
Step 2
Select Phantom Button
Select Button to Set Type
1. RM - Home
2. RM - Btn 2
3. RM - Btn 3
4. RM - Btn 4
Back
Use the and buttons to highlight a Phantom
Button. Press "Select" (
ed button from ROOM to SCENE or SCENE to
ROOM.
Note: Changing the button type will erase any pro-
gramming currently on the button. If there is program-
ming on the button, the following confirmation screen
will be displayed when "Select" (
pressed:
Are you sure?
Change Home
to Scene?
CAUTION – THIS WILL ERASE ALL
PROGRAMMING ON THIS BUTTON
Cancel
( button) to confirm the change, or "Cancel" (
button) to cancel the change.
Note: The ALL ON and ALL OFF buttons (Phantom
Buttons 16 and 17) can only be SCENES.
Select
button) to change select-
button) is
Yes
Press "Yes"
Setup Guide for the RadioRA Chronos System Bridge 41