Table of Contents
Advertisement
Contact Closure Programming
Step 4
Assign Lighting Zone
Controls to the CCI
From CCI Setup, select Assign Zones.
Assign Zones
Turn on devices to be
assigned to CCI 1.
Copy Button
Note: To use the Copy Button Feature, refer
to pages 49-51.
Assign Dimmers or Switches to the CCI by
turning the controls ON, including Dimmers or
Switches that are to be turned OFF when the
CCI is activated.
Dimmer
Assign GRAFIK Eye
Units to the CCI by selecting a GRAFIK
Eye/GRAFIK RA scene. Assign all GRAFIK
Eye/GRAFIK RA Control Units that will be
affected by this CCI, including those Control
Units that are to be turned OFF when the CCI
is activated.
Press "Done" (
Setup.
74
Setup Guide for the RadioRA Chronos System Bridge
Done
OR
Switch
/GRAFIK RA
Control
®
TM
button) to return to CCI
Step 5
Set light levels and GRAFIK
Eye/GRAFIK RA Scenes
From CCI Setup, select Set Levels.
Set Zone Levels
Set light levels for
devices assigned to
CCI 1.
Copy Button
Note: To use the Copy Button Feature, refer
to pages 49-51.
Use the dimming rocker to adjust the light
level of any Dimmer(s) assigned to the CCI
OR use the toggle button to turn Dimmers or
Switches OFF if they are to be turned OFF
when the CCI is activated.
Select one of the preprogrammed scenes on a
GRAFIK Eye/GRAFIK RA Control Unit by turn-
ing that scene ON OR select the Off Scene on
the GRAFIK Eye/GRAFIK RA Control Unit if it
is to be turned OFF when the CCI is activated.
Press "Done" (
button) to return to CCI
Setup.
Done
Advertisement
Table of Contents
