Table of Contents
Advertisement
Using the Button Copy Feature
Step 5
Select Master Control button
in the other system to copy
from
Use
and
to highlight the same button or scene
(from the previous steps) to be copied to. Press
"Select" (
button) to enter Zone Assignment Mode
or Level Set Mode for the button/scene selected.
Assign Zones
Turn on devices to be
assigned to Morning.
Copy Button
From the Assign Zones or Set Zone Levels screen
for the selected button or scene, press "Copy
Button" (
button).
Copy From
Phantom Buttons
Time Clock Scenes
CCI Scenes
Master Control
Back
Use
and
to highlight Master Control.
To exit without making changes, press "Back"
(
button). To proceed to the next step, press
"Select" (
button).
Continue
Select
Setup Guide for the RadioRA Chronos System Bridge
Step 6
Select the Master Control but-
ton to copy from
Select Button to Copy
Press and hold a SCENE
button on a Master
Control in order to copy
over the programming.
Back
All LEDs on Master Controls will be blinking. Press
and hold the Master Contol button to be copied from,
until the LED for that button turns OFF.
Press "Continue" (
button) when the button has
been copied.
Repeat Steps 2-6 to copy to additional buttons.
Press "Exit" (
button) to exit Assignment Mode /
Level Set Mode.
Note: In order to merge programming from two
Master Control buttons, the Master Control
used in this step must be on a different system
from the Master Control used in Step 2. If the
button pressed in this step is on the same sys-
tem as the Master Control in Step 2, all
programming for the button copied in Step 2 will
be overwritten.
• Copying Buttons from Master Controls to
Chronos System Bridge is now complete.
Help
51
Advertisement
Table of Contents
