Table of Contents
Advertisement
Astronomical Time Clock Programming
Step 6
Enter Level Set Mode
From Manage Scenes, select Set Zone Levels. The
list of Time Clock Scenes is displayed:
Select Scene to Set Levels
1. Morning
2. Scene 2
3. Scene 3
4. Scene 4
Back
Use
and
to highlight a Time Clock Scene.
Press "Select" (
button) to enter Level Set Mode
for the highlighted button. The following screen will be
displayed while level set mode is initiated:
Set Zone Levels
Entering Level Set
Mode...
Once Level Set Mode has been initiated, the following
screen will be displayed:
Set Zone Levels
Set light levels for
devices assigned to
Morning.
Copy Button
Note: To use the Copy Button Feature, refer to pages
49-51.
Select
Continue
Setup Guide for the RadioRA Chronos System Bridge
Step 7
Set light levels and GRAFIK
Eye
/GRAFIK RA
®
Use the dimming rocker to adjust the light
level of any Dimmer(s) assigned to the Time
Clock Scene OR use the toggle button to turn
the Dimmer or Switch off if it is to be turned
OFF when the Time Clock Scene is activated.
Select one of the Scenes on a GRAFIK
Eye/GRAFIK RA Control Unit by turning that
scene, OR select the Off Scene button on the
GRAFIK Eye/GRAFIK RA Control Unit if it is
to be turned OFF when the Time Clock Scene
is activated.
Scenes
TM
57
Advertisement
Table of Contents
