Table of Contents
Advertisement
Contact Closure Programming
Step 6
Set Actions
From CCI Setup select Set Actions.
Set CCI Actions
Fade Time - - - - - - -
Switches - - - - - - - -
Cancel
Use
and
to change the value of the
selected setting. Use
next / previous setting.
Fade Time determines the fade time of the
selected CCI. The options are Default (1 sec-
ond ON, 3 seconds OFF), 1 second, 3 sec-
onds, 10 seconds, 30 seconds, 1 minute, 4
minutes, and Legacy.
If the system contains Dimmers,
Switches, or GRAFIK Eye
that were manufactured prior to
January 1, 2001, the Legacy setting
MUST be used.
Switches determines whether any switches
for the selected CCI operate:
• First On / First Off (FO/FO)
• Last On / Last Off (LO/LO)
• First On / Last Off (FO/LO)
• Last On / First Off (LO/FO)
Repeat Steps 1-6 for any remaining Contact
Closure Inputs that need to be set up.
Press "Done" (
complete.
• Setting up a General Purpose Contact
Closure Input for Scene Control is com-
plete.
Default
FO/FO
Done
and
to select the
Interfaces
®
button) when changes are
Setup Guide for the RadioRA Chronos System Bridge
75
Advertisement
Table of Contents
