Table of Contents
Advertisement
Advanced Local Programming
Step 3
Erase button
While the LED is fluttering, press the ALL OFF
or Lower button in the right most column.
Tabletop Master
The LED will stop fluttering and begin to flash.
All Lighting Zone Controls will turn off, and
programming is now erased from that Master
Control button.
Note: When erasing the ALL ON or ALL OFF
buttons, all Lighting Zone Controls will be
re-assigned to the buttons; therefore, they will
turn ON.
• Repeat Steps 2 and 3 for all Master Control but-
tons with programming to be erased.
OR
Wall Master
Setup Guide for the RadioRA Chronos System Bridge
Step 4
Complete Erasing Button
Programming
Simultaneously press the 2nd and 4th buttons
in the right most column until all LEDs begin
to flutter (approximately 3 seconds).
• Erasing Master Control button programming is
complete.
39
Advertisement
Table of Contents
