Table of Contents
Advertisement
Contact Closure Programming
Step 3
Assign Zones to Flash
From Security Setup, select Assign Zones
to Flash.
Assign Zones to Flash
Turn on devices to be
assigned to Security Flash.
Copy Button
Assign Dimmers or Switches by turning the
controls ON.
Dimmer
Assign a GRAFIK Eye
Unit by selecting a GRAFIK Eye/GRAFIK RA
scene.
If the wrong Lighting Zone Control is assigned
to Security Flash, turn the Lighting Zone
Control OFF to unassign it.
Press "Continue" (
Security Setup.
Press "Exit" (
button) to return to Contact
Closure Setup.
• Security Contact Closure Input Setup is
complete.
78
Setup Guide for the RadioRA Chronos System Bridge
Continue
OR
Switch
/GRAFIK RA
Control
®
TM
button) to return to
Advertisement
Table of Contents
