Asymmetric Fade Rates; Changing Asymmetric Fade Rates - Lutron Electronics RadioRA RA-SBT-CHR Setup And Installation Manual

Asymmetric Fade Rates

Changing Asymmetric Fade Rates

Dimmers that have the push-in/pull-out FASS
Fade Rates are enabled, the dimmers will turn on quickly and turn off slowly. When Asymmetric Fade Rates are
disabled, the dimmers will turn on and off at the same rate.
This feature is disabled in the Dimmers' default state. Asymmetric Fade Rates may be enabled through the
Chronos System Bridge. Note: Enabling or Disabling Asymmetric Fade Rates will affect all dimmers (with the
TM
push-in/pull-out FASS) in all systems affected by the Chronos System Bridge.
Step 1
Go to Asymmetric Fade Rates
Main Menu
User Preferences
Asymmetric Fade Rates
Asymmetric Fade Rates
Enable Asymmetric Fade
Disable Asymmetric Fade
Cancel
Use and to highlight the desired option, and
press OK to proceed to the next step.
Step 2
Enable or Disable Asymmetric
Fade
To Enable Asymmetric Fade:
Enable Asymmetric Fade
Dimmers will turn on quickly
and turn off slowly.
Previous
Press "Next" ( button) to enable Asymmetric
Fade. Press "Previous" (
enable operation.
Are you sure?
Enable Asymmetric Fade?
Previous
Press "Yes" ( button) to confirm enabling
Asymmetric Fade. Press "Previous" (
return to the previous screen.
Asymmetric Fade is now enabled.
have Asymmetric Fade Rate capability built in. When Asymmetric
TM
Next
Next
button) to cancel the
Yes
button) to
Setup Guide for the RadioRA Chronos System Bridge
To Disable Asymmetric Fade:
Disable Asymmetric Fade
Dimmers will turn on and
off at the same rate.
Previous
Press "Next" ( button) to disable Asymmetric
Fade. Press "Previous" (
disable operation.
Are you sure?
Disable Asymmetric Fade?
Previous
Press "Yes" ( button) to confirm disabling
Asymmetric Fade. Press "Previous" (
return to the previous screen.
Asymmetric Fade is now disabled.
Next
button) to cancel the
Yes
button) to
83