Lutron Electronics RadioRA RA-SBT-CHR Setup And Installation Manual page 81

Wireless central lighting control
Table of Contents

Advertisement

Dimmer Locked Presets
Enable Dimmer Locked Presets (continued)
A.
Locally Adjust Option
Enable Locked Presets
Go to each dimmer and
adjust the current
light level to the
desired Locked Preset.
Previous
Set the desired Locked Preset light level at each
Dimmer.
When all Dimmers are set to the desired levels, press
"Next" (
button) to go to Step 4. Press
"Previous" (
button) to return to the previous
screen.
B.
Set New Locked Level Option:
Enable Locked Presets
Select the new Locked
Preset light level.
90%
Previous
Use
and
to adjust the light level up and down.
Once the desired light level is selected, press "Next"
(
button) to go to Step 4. Press "Previous" (
button) to return to the previous screen.
Next
Next
Setup Guide for the RadioRA Chronos System Bridge
Step 4
Go to Dimmer Locked Presets
When the Locally Adjusted or New Locked Preset has
been set, the following screen is displayed:
Enable Locked Presets
Allow Locked Presets to
be changed locally by
quad-tapping the dimmer?
No
Previous
Use
and
to toggle between Yes and No.
Selecting Yes will allow the Locked Presets to be
changed locally at the Dimmers at any time, by quad-
tapping the Dimmer and then setting the new level.
Selecting No will not allow any local changes.
Once Yes or No is selected, press "Next" (
ton) to continue. Press "Previous" (
return to the previous screen.
Are you sure?
Enable Locked Presets?
Previous
Press "Yes" (
button) to confirm enabling Locked
Presets. Press "Previous" (
the previous screen.
Enabling Locked Presets is now complete.
Quad Tap Procedure
1. Quickly tap the tapswitch 4 times. The dimmer will
enter Change Preset Mode, indicated by the
dimmer's LED flashing quickly at the current
Locked Preset level.
2. Use the Raise/Lower rocker to adjust the Locked
Preset. Note: If the dimmer is inactive for 6 sec-
onds, any changes will be discarded and the dim-
mer will return to Normal Mode.
3. Quickly tap the tapswitch 4 times to save the new
locked preset level.
Next
but-
button) to
Yes
button) to return to
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Radiora rb-sbt-chr

Table of Contents