RS-232 Port Programming
When a Lighting Zone Control is assigned, the screen
will change to:
Assign Zone Numbers
Zone has been assigned
successfully.
Continue
Press "Continue" (
button) to continue assigning
Zone Numbers.
Assign Zone Numbers
1
Zone Number - - - - - - - -
Zone is Assigned
Help
Done
Repeat Steps 2 and 3 for any remaining Zone
Numbers to be assigned.
Press "Done" (
button) to return to Device
Number Setup.
• Zone Numbers are now assigned. Proceed to
Assigning Master Control Numbers on page 70.
Setup Guide for the RadioRA Chronos System Bridge
69