Setting The Time Clock Home / Away Mode - Lutron Electronics RadioRA RA-SBT-CHR Setup And Installation Manual

Astronomical Time Clock Programming

Setting the Time Clock Home / Away Mode

The time clock built into Chronos
to run certain events only while the homeowner is out, so that it appears someone is in the house. Convenience
events, such as a morning scene, can be set to only run while someone is there.
Step 1
Go to Set Home / Away Mode
Main Menu
Time Clock Setup
Set Home / Away Mode
Set Home / Away Mode
Home
Runs only Home and
Normal Time Clock Events.
Cancel
Use and to change the Time Clock Mode set-
ting. Press "Cancel" ( button) to return to Time
Clock Setup. Press "Done" (
the mode setting.
The Time Clock Home / Away Mode can also be
changed from the Chronos Status screen. This screen
is accessed by pressing
Home Screen.
Note: If the Time Clock Mode is being controlled by
one of the Contact Closure Inputs, changes will not be
allowed from this screen. The following message will
be displayed:
Set Mode
Note: CCI 1 is
Home
currently controlling the
Runs only Home and
Time Clock Mode.
Normal Time Clock Events.
Press OK to Continue.
Cancel
For details on programming a Contact Closure Input
to control Time Clock Home / Away Mode, see page
76.
• Time Clock Mode is now set.
System Bridge has two modes – Home and Away. These allow the time clock
TM
Done
button) to accept
(Home Button) from the
Done
Setup Guide for the RadioRA Chronos System Bridge 65