Module Memory Ddr Installation Procedure - GE VIVID S60N Basic Service Manual

P R E L I M I N A R Y
D FR091521, R
IRECTION
4.) Remove the Module Memory DDR circuit boards by pressing firmly downwards on the white
securing clips on the left and right sides respectively shown in
The circuit boards will be released as the clips open.
5.) Carefully grip the released circuit board on the left and right sides and slide it evenly upwards away
from the base connectors.
6.) Similarly, remove the second circuit board.
8-5-6-5

Module Memory DDR Installation Procedure

1.) Insert the replacement circuit board by sliding it into its appropriate slots - sliding the circuit board
gently and evenly downwards.
2.) As the circuit board reaches its "home" position, press firmly downward until the plastic securing
clips automatically engage to secure the circuit board.
3.) Repeat
4.) Return the Module Memory DDR cover to its position on the BEP and secure it with the 8 screws
previously removed.
5.) Reinstall the BEP:
• BEP Installation Procedure on page 8 - 97
6.) Turn ON the system and boot-up.
1
EVISION
Figure 8-126 Removing the Module Memory DDR Circuit Boards
step 2 to insert the second circuit board.
Chapter 8 - Replacement Procedures
V S60N/V S70N B
IVID IVID
Figure 8-126.
S M
ASIC ERVICE ANUAL
8-101