Touch Screen Rear Cover Replacement Procedure; Tools; Time Required; Preparation - GE VIVID S60N Basic Service Manual

P R E L I M I N A R Y
D FR091521, R
IRECTION
8-3-3

Touch Screen Rear Cover Replacement Procedure

8-3-3-1

Tools

Phillips screwdriver.
FRU Part #
Refer to
8-3-3-2

Time Required

15 min
8-3-3-3

Preparation

Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in
8-3-3-4

Touch Screen Rear Cover Removal Procedure

Note: The Touch Screen Rear Cover is fastened to the back of the Touch Screen by 3 screws
through securing tabs located on the base of the cover and 2 screws at the top -
External View
1) Check the console is raised to the maximum up position.
Make sure it is aligned in the central position (not pulled to one side or the other).
2) Remove the Touch Screen Service Cover:
•
3.) Remove the 3 securing screws from the base of the cover -
8-36 Section 8-3 - Control Console Components - Replacement Procedures
1
EVISION
Table 9-9 .
on page 9-8
Figure 8-36 Touch Screen Rear Cover - Securing Tabs and Screws
Touch Screen Service Cover Removal Procedure on page 8 - 34
Figure 8-37 Removing the Rear Cover (Base) Securing Screws
V S60N/V S70N
IVID IVID
Power Shut Down on page 4 -
Internal View
Figure 8-37.
B S M
ASIC ERVICE ANUAL
7.
Figure 8-34.