Data Sheet For Enclosure/Chassis Leakage Current - GE VIVID S60N Basic Service Manual

P R E L I M I N A R Y
D FR091521, R
IRECTION
NOTE: For more information, refer to the safety analyzer's user manual that will be used to perform the tests."
The maximum allowable limit for chassis source leakage is shown in:
•
•
10-6-6-3

Data Sheet for Enclosure/Chassis Leakage Current

Table 10-15
Measurements should be recorded from multiple locations for each set of test conditions.
The actual location of the test probe may vary by Ultrasound system.
NOTE: Values in italics font are given as examples only.
Record all data in the Electrical safety tests log.
Table 10-15 Typical Data Format for Recording Enclosure/Chassis Leakage
Unit under test____________________________________
Test Conditions
System
Power
off
off
on
on
NOTE: Values in italics font are given as examples only.
1
EVISION
Table 10-11 on page 10-17
or
Table 10-12 on page 10-17
as Chassis/Enclosure Leakage.
below shows a typical format for recording the enclosure/chassis leakage current.
Grounding/
PE
closed
open
closed
open
Chapter 10 - Care and Maintenance
V
IVID
Measurement/Test Point Location
Rear Lower
Panel Frame
S60N/V S70N B
IVID ASIC
Date of test:_____________
Probe
Connector Main Handle
S M
ERVICE ANUAL
10-21