P R E L I M I N A R Y
D
FR091521, R
IRECTION
Note:
The four TRX32 Boards are each secured in position on the CFE Board by way of a white
plastic holder at each end of the TRX32 Board. These are opened by gently pulling them
outwards to tilt the holder away from the edge of the Board, as shown in
4.) Open each white plastic holder located on either end of the first TRX32 Board to release the board,
then slide the Board upwards to remove it.
5.) Repeat
8-128
Section 8-5 - Electronic Cage Components - Replacement Procedures
1
EVISION
Figure 8-154 TRX32 Boards Secured with Plastic Holders
Figure 8-155 Removing a TRX32 Board
step 4
to remove each of the remaining TRX32 Boards -
Figure 8-156 All TRX32 Boards Removed
V
S60N/V
S70N
IVID
IVID
Figure
Figure
8-156.
B
S
M
ASIC
ERVICE
ANUAL
8-154.