P R E L I M I N A R Y
D
FR091521, R
IRECTION
4-3-5-4
Using Color Mode
4-3-5-4-1
Color 2D
1) From an optimized 2D image, press Color.
2) Use the trackball (assigned function: Pos) to position the ROI frame over the area to be examined.
3) Press Select. The instruction Size should be highlighted in the trackball status bar.
NOTE:
If the trackball control Pointer is selected, press Trackball to be able to select between Position and
Size controls.
4) Use the trackball to adjust the dimension of the ROI.
4-3-5-4-2
Color M-Mode
1) From M-Mode press Color.
2) Use the trackball (assigned function: Pos) to position the color area in the M-Mode display.
3) Press Select. The instruction Size should be highlighted in the trackball status bar.
NOTE:
If the trackball control Pointer is selected, press Trackball to be able to select between Position and
Size controls.
4) Use the trackball to adjust the dimension of the color area.
1
EVISION
Chapter 4 - General Procedures and Functional Checks
V
S60N/V
S70N B
IVID
IVID
S
M
ASIC
ERVICE
ANUAL
4-27