P R E L I M I N A R Y
D
FR091521, R
IRECTION
8-6-6-4
Removing the LCD Arm Riser
1.) Remove the cables one by one.
2.) Unscrew three screws and remove the LCD Arm Riser.
8-6-6-5
Install the LCD Arm Riser
Install the LCD Arm Riser by performing
sequence.
Torque:
•
The tree M5 screws shall be tightened with Torque: 5.8 Nm +/- 5%.
•
The tree M3 screws shall tightened with Torque: 1.3 Nm +/- 5%.
8-154
Section 8-6 - Mechanical Platform Components - Replacement Procedures
1
EVISION
Figure 8-188 Unscrew three screws and remove the LCD Arm Riser
V
S60N/V
IVID
Removing the LCD Arm Riser on page 8 - 154
S70N
B
S
IVID
ASIC
ERVICE
in reverse
M
ANUAL