Ecg Check; Introduction; Parts Needed; Preparations - GE VIVID S60N Basic Service Manual

P R E L I M I N A R Y
D FR091521, R
IRECTION
4-3-9

ECG Check

4-3-9-1

Introduction

The ECG capability on this unit, is intended as use as a trigger for measurements, but can also be
viewed on the screen.
4-3-9-2

Parts Needed

• ECG Harness, P/N:16L0026 + P/N:16L0028
• ECG Pads, (3 pc)
or
• ECG simulator
4-3-9-3

Preparations

None
4-3-9-4 ECG Check
Table 4-3 ECG Checks
Step
1
2
1
EVISION
Task
Connect the ECG harness to the
connector on the front of the
system.
Connect the three leads to an
ECG simulator,
or:
Fasten the three ECG Pads to
your body and connect the three
leads to respective ECG Pad.
Chapter 4 - General Procedures and Functional Checks
V S60N/V
IVID IVID
Expected Result(s)
The unit displays a straight curve along
the bottom edge of the image sector on
the screen.
When connecting, the signal on the
screen will be noisy.
When the connection is completed, a
typical clean ECG signal is displayed.
S70N B S M
ASIC ERVICE ANUAL
4-35