GE VIVID S60N Basic Service Manual page 276

P R E L I M I N A R Y
D FR091521, R
IRECTION
6.) Tilt the keyboard assembly upwards, exposing the three cables connected to the keyboard
assembly - see
Figure 8-52 Underside of the Keyboard Assembly Showing Cables Connected
7) Using the appropriate screwdriver release the securing screw and unplug the data port cable from
the Keyboard Assembly as shown in
8.) Unplug the Video Signal cable and using a flat screwdriver, release the securing screw and unplug
the power cable from the Keyboard Assembly - see
9) After releasing the three cables, lift the keyboard assembly upwards and remove it from the system.
8-46 Section 8-3 - Control Console Components - Replacement Procedures
1
EVISION
Figure 8-52
Figure 8-53 Removing the Keyboard Assembly from the System
V
below.
Power Cable
Data Port Cable
Figure 8-52, above.
S60N/V S70N B
IVID IVID
Video Signal Cable
Figure 8-52, above.
S M
ASIC ERVICE ANUAL