Table of Contents
Advertisement
Configuring the Altitude AP
To add and register an Altitude AP manually:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 Click Add Altitude AP. The Add Altitude AP page is displayed.
3 In the Serial # box, type the unique identifier.
4 In the Hardware Type drop-down list, click the hardware type of the Altitude AP.
5 In the Name box, type a unique name for the Altitude AP.
6 In the Role drop-down list, click the Altitude AP's role - Access Point.
7 In the Description box, type descriptive comments for the Altitude AP.
8 Click Add Altitude AP. The Altitude AP is added and registered.
When an Altitude AP is added manually, it is added to the controller database only and does not get
assigned.
9 Click Close.
Configuring Altitude AP settings
Altitude APs are added with default settings, which you can adjust and configure according to your
network requirements. In addition, you can modify the properties and the settings for each radio on the
Altitude AP.
You can also locate and select Altitude APs in specific registration states to modify their settings. For
example, this feature is useful when approving pending Altitude APs when there are a large number of
other Altitude APs that are already registered. On the Access Approval page, click Pending to select all
pending Altitude APs, then click Approve to approve all selected Altitude APs.
Configuring Altitude AP settings can include the following processes:
Modifying an Altitude AP's status
Modifying an Altitude AP's properties
Modifying Altitude AP radio properties
Setting up the Altitude AP using static configuration
84
Summit WM User Guide, Software Version 5.3
Advertisement
Table of Contents
