Configuring Web Session Timeouts - Extreme Networks Summit WM User Manual

NOTE
If you want to use the Summit WM Controller as the NTP Server, select the Run local NTP Server checkbox, and
then skip to Step 5.
3 In the Time Server 1 text box, type the IP address or FQDN (Full Qualified Domain Name) of a NTP
Time Server that is accessible on the enterprise network.
4 Repeat Step 3 for Time Server 2 and Time Server 3 text boxes.
If the system is not able to connect to the Time Server 1, it will attempt to connect to the additional
servers that have been specified in Time Server 2 and Time Server 3 text boxes.
5 From the left pane, click Software Maintenance. The System Maintenance page is displayed.
6 Click the Apply.
7 Reboot the Summit WM Controller. The WLAN network time is synchronized in accordance with the
specified time server.

Configuring Web session timeouts

You can configure the time period to allow Web sessions to remain inactive before timing out.
To configure Web session timeouts:
1 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
2 In the left pane, click Web Settings. The Summit WM Controller Web Management Settings page is
displayed.
Summit WM User Guide, Software Version 5.3
305