Extreme Networks Summit WM User Manual page 74

Configuring the Altitude AP
Center LED
The Center LED indicates the general status of the Altitude AP:
Table 5: Center LED and Altitude AP's status
Center LED
Blinking Green
Blinking Orange/Amber
Blinking Red
Solid Red
Solid Green
Solid Orange/Amber
Left LED
The Left LED indicates the high-level state of the Altitude AP during the initialization and discovery
process:
Table 6: Left LED and Altitude AP's high-level state
Left LED
Off
Blinking Green
Solid Green
Left and Right LEDs
The Right LED indicates the detailed state during the initialization and discovery processes:
Table 7: Left and Right LEDs and Altitude AP's detailed state
Left LED
Off
Blinking Green
Solid Green
Composite view of the three LEDs
The Center, Left and the Right LEDs work in conjunction to indicate the general, high-level state and
the detailed state respectively.
74
Altitude AP's status
Initialization and discovery in progress via Ethernet link
Initialization and discovery in progress via WDS link
Error during initialization/discovery process
Irrecoverable error
Discovery finished via Ethernet link
Discovery finished via WDS link
Altitude AP's high-level state
Initialization
Network Discovery
Connecting with the Summit WM Controller
Right LED Altitude AP's detailed state
Off Initialization: Power-on self-test (POST)
Blinking Green Initialization: Random delay
Solid Green Initialization: Vulnerable period
Off Network Discovery: 802.1X authentication
Blinking Green Network Discovery: Attempting to obtain IP address via DHCP
Solid Green Network Discovery: Discovered Summit WM Controller
Off Connecting to Summit WM Controller: Attempting to register with the
Summit WM Controller
Blinking Green Connecting to Summit WM Controller: Upgrading to higher version
Solid Green Connecting to Summit WM Controller: Configuring itself
Summit WM User Guide, Software Version 5.3