Bridging Traffic Locally - Extreme Networks Summit WM User Manual

WM Access Domain Services configuration
UL Policer Action - If Use Global Admission Control for Voice (VO) or Use Global Admission
Control for Video (VI) is enabled, click the action you want the Altitude AP to take when TSPEC
violations occurring on the uplink direction are discovered:
Do nothing - Click to allow TSPEC violations to continue when they are discovered. Data
transmissions will continue and no action is taken against the violating transmissions.
Send DELTS to Client - Click to end TSPEC violations when it they are discovered. This
action deletes the TSPEC.
DL Policer Action - If Use Global Admission Control for Voice (VO) or Use Global Admission
Control for Video (VI) is enabled, click the action you want the Altitude AP to take when TSPEC
violations occurring on the downlink direction are discovered:
Do nothing - Click to allow TSPEC violations to continue when they are discovered. Data
transmissions will continue and no action is taken against the violating transmissions.
Downgrade - Click to force the transmission's data packets to be downgraded to the next
priority when a TSPEC violation is discovered.
Drop - Click to force the transmission's data packets to be dropped when a TSPEC violation is
discovered.
8 To apply the Bandwidth Control Profile to the WM-AD, select the profile from the Bandwidth
Control Profile menu.
9 To save your changes, click Save.

Bridging traffic locally

A WM-AD must first be setup before traffic can be bridged locally. For more information, see
4, "WM Access Domain Services."
To bridge traffic locally:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration page is displayed.
2 In the left pane, type a name that will identify the new WM-AD in the Add subnet box.
3 Click Add subnet. The name is displayed in the WM Access Domain list. The Topology tab is
displayed.
4 In the WM-AD Mode drop-down list, click Bridge Traffic Locally at AP to enable branch office
mode.
5 To define the VLAN Setting, select one of the following:
Tagged
Untagged
210
Summit WM User Guide, Software Version 5.3
Chapter