Working With Summit Wm Series Spy Scan Results - Extreme Networks Summit WM User Manual

Working with the Summit WM series Spy
NOTE
In the current release, there is no capability to initiate a DoS attack on the detected rogue access point.
Containment of a detected rogue requires an inspection of the geographical location of its Scan Group area,
where its RF activity has been found.

Working with Summit WM series Spy scan results

When viewing the Summit WM series Spy scan results, you can delete individual or all of the access
points from the scan results. You can also add access points from the scan results to the Friendly AP
list.
To view Summit WM series Spy scan results:
1 From the main menu, click Summit Spy. The Summit Spy page is displayed.
2 Click the Rogue Detection tab.
3 To modify the page's refresh rate, type a time (in seconds) in the Refresh every __ seconds box.
4 Click Apply. The new refresh rate is applied.
268
Summit WM User Guide, Software Version 5.3