Extreme Networks Summit WM User Manual page 26

Overview of the Controller, Access Points, and WM software solution
6 Wireless AP Configuration - Modify properties or settings of the Wireless AP, if applicable.
7 WM Access Domain Services (WM-AD) Setup - Set up one or more Access Domains on the Summit
WM Controller. For each WM-AD, configure the following:
Topology - Configure the WM-AD.
RF - Assign the Wireless APs' radios to the WM-AD.
Authentication and Accounting - Configure the authentication method for the wireless device
user and enable the accounting method.
RAD Policy - Define filter ID values and WM-AD Groups
Filtering - Define filtering rules to control network access
Multicast - Define groups of IP addresses for multicast traffic
Privacy - Select and configure the wireless security method on the WM-AD.
QoS Policy - Configure the Qos Policy.
26
Summit WM User Guide, Software Version 5.3