SpectraLink Wireless Telephones
3 Click Add subnet. The name is displayed in the WM-AD list. The Topology tab is displayed.
4 From the WM-AD Mode drop-down menu, select the appropriate WM-AD mode:
NOTE
It is recommended that you should choose Bridge Traffic Locally at WM-AD for SpectraLink network deployment.
5 From the DHCP Option drop-down menu, you can select either the Local DHCP Server or Use
DHCP Relay, depending upon your network topology.
6 In the Gateway box, type the network gateway address.
7 In the Mask box, type the appropriate values.
8 In the Address Range boxes (from and to), type the IP address range.
9 From the Assignment Type drop-down menu, select SSID.
10 Under Timeout section, type 2 in the pre and post boxes.
11 Under Next Hop Routing section, type 50000 in the OSPF Route Cost box.
12 Click Save.
370
Summit WM User Guide, Software Version 5.3