Extreme Networks Summit WM User Manual page 352

Regulatory information
Table 41: List of IC approved antennas - Altitude 451 (Continued)
# Model
#2 S24493TS
#3 SL24513WP
#4 S24497Pxxx
#5 HG2458CUx
xx
#6 MDO24005P
Txxx
NOTE
The qualification testing and results are based on above described antennas, cable types, lengths, and connector
types. Other cable lengths and connector types are also available which are specified by the suffix part of the part
numbers (ex. SR2405135Dxxx, where the xxx suffix represents cable length and/or connector type). The antenna
feedline used in testing are the minimum cable length. Longer cable may be used with losses greater than or equal
to the cables used for testing. The maximum power settings must be adjusted according to
NOTE
If one of the above antennas is used, you must select an operating channel (on the Altitude APs configuration pages)
and the corresponding allowed max power from the values listed in
power than the value listed in
352
Application Shape
indoor omni, 3
inputs
indoor omni
indoor 60 degree
sector
directional
Hyperlink Tech
indoor omni
Maxrad
indoor omni, 2
inputs
Table 42 and Table 43.
Gain Frequency Coax Cable
(dBi) (MHz) Length/Type
3 2400- 3 feet /
2500 19AWG
CMP(ETL)
4900-
C(ETL)
5990
9700851
3 2400- 3 feet /
2500 19AWG
CMP(ETL)
5150-
C(ETL)
5850
9700851
7 2400- 3 feet /
8 2500 19AWG
CMP(ETL)
4900-
C(ETL)
5990
9700851
3 2300- 1 foot /
2600 20AWG
4900- Coleman
6000 Cable
921021
5.2 2400- 3 feet /
2485 19AWG
CMP(ETL)
C(ETL)
9700851
Table 42 and Table
Summit WM User Guide, Software Version 5.3
Total #
Connector required
Type antennas
RPSMA, 1
3ea.
RPSMA 3
RPSMA 3
N-female 3
RPSMA, 1
2ea.
Table 42 and Table 43.
43. DO NOT select a higher