Configuring Summit Wm Controller For Spectralink Telephones; Setting Up Ssid - Extreme Networks Summit WM User Manual

Configuring Summit WM Controller for SpectraLink
Telephones
This section describes how to configure the Summit WM Controller and Altitude APs for use with
SpectraLink Wireless Telephones.
You have to configure the following features in the Summit WM Controller to set it up for SpectraLink
telephones:
Radio properties
SSID
Filters
Multicast configuration
Security
Quality of Service (QoS)
NOTE
The configuration process for SpectraLink telephones applies identically to Summit WM APs, Outdoor APs and
Altitude 802.11n APs, unless specified otherwise.

Setting up SSID

To set up the SSID:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration screen is displayed.
2 In the left pane, type a name that will identify the new WM-AD in the Add subnet box.
Summit WM User Guide, Software Version 5.3
369