Privacy For A Wm-Ad For Aaa - Extreme Networks Summit WM User Manual

WM Access Domain Services configuration
8 To enable re-keying after a time interval, select Broadcast re-key interval.
If this checkbox is not selected, the Broadcast encryption key is never changed and the Altitude AP
will always use the same broadcast key for Broadcast/Multicast transmissions. This will reduce the
level of security for wireless communications.
9 In the Broadcast re-key interval box, type the time interval after which the broadcast encryption key
is changed automatically. The default is 3600.
10 In the Pre-Shared Key box, type the shared secret key to be used between the wireless device and
Altitude AP. The shared secret key is used to generate the 256-bit key.
11 To proofread your entry before saving the configuration, click Unmask to display the Pre-Shared
Key. To mask the key, click Mask.
12 To save your changes, click Save.

Privacy for a WM-AD for AAA

For a WM-AD with authentication by 802.1X (AAA), there are four Privacy options:
Static keys (WEP)
Dynamic keys
Wi-Fi Protected Access (WPA) version 1, with encryption by Temporal Key Integrity Protocol (TKIP)
Wi-Fi Protected Access (WPA) version 2, with encryption by Advanced Encryption Standard with
Counter-Mode/CBC-MAC Protocol (AES-CCMP)
NOTE
In order to use WPA with 802.1X authentication, network assignment must be AAA.
196
Summit WM User Guide, Software Version 5.3