Extreme Networks Summit WM User Manual page 194

WM Access Domain Services configuration
If WPA v.1 is disabled, the Altitude 802.11n AP will advertise the encryption cipher AES
(Advanced Encryption Standard).
NOTE
The security encryption for some network cards must not to be set to WEP or TKIP to achieve a data rate beyond
54 Mbps.
To configure privacy by static WEP for a Captive Portal WM-AD:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration page is displayed.
2 In the left pane WM Access Domains list, click the WM-AD you want to configure privacy by static
WEP for a Captive Portal. The Topology tab is displayed.
3 Click the Privacy tab.
4 Select Static Keys (WEP).
5 From the WEP Key Length drop-down list, click the WEP encryption key length:
64-bit
128-bit
152-bit
6 Select one of the following input methods:
Input Hex - If you select Input Hex, type the WEP key input in the WEP Key box. The key is
generated automatically, based on the input.
194
Summit WM User Guide, Software Version 5.3