Extreme Networks Summit WM User Manual page 87

To modify an Altitude AP's properties:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 In the Altitude AP list, click the Altitude AP whose properties you want to modify. The WAP
Properties tab displays Altitude AP information.
3 Modify the Altitude AP's information:
Name - Type a unique name for the Altitude AP that identifies the AP. The default value is the
Altitude AP's serial number.
Description - Type comments for the Altitude AP.
WAP Environment - Click the Altitude AP's environment - Indoor or Outdoor.
NOTE
The WAP Environment drop-down is displayed on the WAP Properties tab only if the selected Altitude AP is the
Outdoor AP.
Since the Outdoor AP can be deployed in both indoor and outdoor environments, the WAP Properties page
enables you to specify the environment.
Poll Timeout - Type the timeout value, in seconds, for the Altitude AP to re-establish the link
with the Summit WM Controller if it (Altitude AP) does not get an answer to its polling. The
default value is 15 seconds.
NOTE
If you are configuring session availability, the Poll Timeout value should be 1.5 to 2 times of Detect link failure
value on WAP Properties screen. For more information, see
Summit WM User Guide, Software Version 5.3
"Session availability" on page 237.
87