Setting Up Quality Of Service (Qos) - Extreme Networks Summit WM User Manual

SpectraLink Wireless Telephones
3 Select the WPA-PSK radio button.
4 Select the WPA v.2 radio button.
5 Under WPA v.2 section, select AES only from the Encryption drop-down menu.
NOTE
The SpectraLink telephones must also be for WPA v.2 security.
6 Enter the appropriate pass phrase in the Pre-shared key field.
7 Click Save.

Setting up Quality of Service (QoS)

To set up Quality of Service (QoS):
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration screen is displayed.
2 On the WM Access Domain Configuration screen, click the QoS Policy tab.
3 Under the Wireless QoS section, select the following:
Legacy
Turbo Voice
NOTE
If you are using Altitude APs and Outdoor APs, you must ensure that Turbo Voice QoS is selected to achieve best
voice quality with the SpectraLink telephones. Turbo Voice QoS does not have any effect on Altitude 802.11n APs
as these APs provide best voice quality regardless of whether Turbo Voice QoS is selected or not.
374
Summit WM User Guide, Software Version 5.3