Setting Up A New Wm-Ad - Extreme Networks Summit WM User Manual

To create a Bandwidth Control profile:
1 From the main menu, click WM Access Domains. The WM-AD list is displayed.
2 In the left pane, click Global Settings.
3 Click the Bandwidth Control tab.
4 Create a Bandwidth Control profile by doing the following:
In the Profile Name box, type a name.
In the Average Rate (CIR) box, type the CIR value.
In the Burst Size (CBS) box, type the CBS value.
5 Click on Add Profile. The profile is created and the profile's name is displayed under the
Bandwidth Control Profiles section.
NOTE
You can create as many profiles as you need.
6 To save your changes, click Save.

Setting up a new WM-AD

Now that you are familiar with the WM-AD concepts, you can now set up a new WM-AD. Setting up a
new WM-AD involves the following general steps:
Step one - Create a WM-AD name
Summit WM User Guide, Software Version 5.3
153