Extreme Networks Summit WM User Manual page 332

Summit WM Controller's physical description
Table 29: LED states and SSD codes during firmware initialization (Continued)
Active LED
Green
Green
NOTE
Although the Active LED will be lit Green during the firmware initialization, this LED state is irrelevant to the SSD
display or the condition. You must ignore the LED state during the firmware initialization.
Application initialization:
Table 30: LED states and SSD codes during application initialization
Active LED
Green
Green
Green
Green
Green
Green
Green
Warning conditions:
Table 31: LED states and SSD codes during warning conditions
Active LED
Green
Green
Green
Green
Green
332
Warning Error SSD
LED LED Codes
9
b
Warning Error
LED LED SSD Code
0
C
1
2
3
A
H
Warning Error
LED LED SSD Code
Yellow 1
Yellow 2
Yellow 3
Yellow 4
Yellow 5
Condition
The system is loading subsystem.
The system is starting the operation system. The system is
active.
Condition
Application initialization started.
System configuration in progress
Continuing application initialization
Initializing Forwarding Engine
Completing application initialization.
Application initialization complete. System active.
System halted. Administrator requested halting of system.
Condition
High temperature reached.
Fan unit failure. Rotation counter indicates zero speed for
one of the lateral trays. May be the result of fan tray
removal.
Power supply failure. Failed to detect one of the power
supplies. May be the result of the fan tray removal of one of
the power supplies.
FDD low sector count (40 backup sectors remaining).
FDD extremely low sector count (20 backup sectors
remaining)
Summit WM User Guide, Software Version 5.3