Table of Contents
Advertisement
2
Configuration
Pre-Configuration Tasks
Configuring the Application Analytics Engine
Launching the Application Analytics Application
Adding the Application Analytics Engine
Changing Application Analytics Engine Settings
Upgrading Application Analytics Engine Software
Once the PV-A-305 engine is physically installed into a rack, you need to connect a monitor and a USB
keyboard, connect the power cord and network cable, and power it on (see
Figure 3
on page 10).
After the engine boots and the engine installation is complete, you must go through the initial
configuration process described in this chapter.
This chapter also includes information on how to change your engine settings following your initial
configuration and how to upgrade the Extreme Management Center application software. For
information on reinstalling the Extreme Management Center engine software, see
Software
on page 26.
Pre-Configuration Tasks
Ensure that you have the following information prior to executing the configuration steps in the next
section:
•
Engine hostname, IP address, and netmask
•
Default gateway IP address
•
Name server IP address and domain name
•
NIS (Network Information Services) server IP address
•
Network Time Protocol (NTP) server IP address
In addition, you need to obtain the appropriate Extreme Management Center software license prior to
launching the Extreme Management Center applications. You will be prompted to enter a license when
you launch the application. (When you purchased Extreme Management Center, you received a
Licensed Product Entitlement ID. This Entitlement ID allows you to generate a product license. Refer to
the instructions included with the Entitlement ID that was sent to you.)
Configuring the Application Analytics Engine
After the initial engine installation is complete, use the following steps to configure the virtual engine to
run the Application Analytics application:
1
Login as root with no password, and press [Enter].
The following screen appears:
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
Figure 1
on page 9 and
Reinstalling Engine
14
Hide quick links:
Advertisement
Table of Contents
