European Community - Extreme Networks Summit WM User Manual

Regulatory information

European community

The Altitude APs are designed for use in the European Union and other countries with similar
regulatory restrictions where the end user or installer is allowed to configure the Altitude AP for
operation by entry of a country code relative to a specific country. Upon connection to the controller, the
software will prompt the user to select a country code. After the country code is selected, the controller
will set up the Altitude AP with the proper frequencies and power outputs for that country code.
Although outdoor use may be allowed and may be restricted to certain frequencies and/or may require
a license for operation, the Altitude 350-2i/350-2d AP is intended for indoor use and must be installed
in a proper indoor location. Use the installation utility provided with the controller software to ensure
proper set-up in accordance with all European spectrum usage rules. Contact local Authority for
procedure to follow and regulatory information. For more details on legal combinations of frequencies,
power levels and antennas, contact Extreme Networks.
Declaration of Conformity with R&TTE Directive of the European Union 1999/5/EC
The following symbol indicates compliance with the Essential Requirements of the R&TTE Directive of
the European Union (1999/5/EC).
356
Summit WM User Guide, Software Version 5.3