Wm-Ad Global Settings; Defining Radius Servers For Global Settings - Extreme Networks Summit WM User Manual

WM-AD global settings

Before defining a specific WM-AD, define the global settings that will apply to all WM-AD definitions.
These global settings include:
Configuring the location and password of RADIUS servers on the enterprise network. The defined
servers appear as available choices when you set up the authentication mechanism for each WM-AD.
Defining the shared secret used to encrypt the Pairwise Master Key (PMK) for WPA2 v.2 pre-
authentication between Summit WM Controllers on the network.
Enabling Dynamic Authorization Server (DAS) configuration support.
NOTE
You should enable Dynamic Authorization Server (DAS) only if you have DAS Server deployed on your network.
Adjusting admission control thresholds. Admission control thresholds protect admitted traffic
against overloads, provides distinct thresholds for VO and VI, and distinct thresholds for roaming
and new streams.
Defining Bandwidth Control Profiles. The Bandwidth Control Profiles you define appear as available
choices in Bandwidth Control Profiles menu when you set up QoS policy for WM-ADs.

Defining RADIUS servers for Global Settings

To define RADIUS servers for WM-AD global settings:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domains list is
displayed.
2 In the left pane, click Global Settings. The Authentication tab is displayed.
Summit WM User Guide, Software Version 5.3
149