Configuring the Altitude AP
Modifying Altitude AP 350-2i/350-2d radio properties
The following section discusses how to modify an Altitude AP 350-2i/350-2d and the Outdoor AP. For
information on how to modify an Altitude 802.11n AP 450/451, see
450/451 radio properties" on page
To modify the Altitude AP's radio properties:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 Click the appropriate Altitude AP in the list.
3 Click the radio tab you want to modify.
Each tab displays the radio settings for each radio on the Altitude AP. If the radio has been assigned
to a WM-AD, the WM-AD names and MAC addresses appear in the Base Settings section. The
Summit WM Controller can support the following:
WM200/2000 - Up to 64 WM-ADs
WM20 - Up to 8 WM-ADs
WM1000 - Up to 50 WM-ADs
WM100 - Up to 32 WM-ADs
The Altitude AP radios can be assigned to each of the configured WM-ADs in a system. Each radio
can be the subject of 8 WM-AD assignments (corresponding to the number of SSIDs it can support).
Once a radio has all 8 slots assigned, it is no longer eligible for further assignment.
106
90.
"Modifying Altitude 802.11n AP
Summit WM User Guide, Software Version 5.3