Extreme Networks Summit WM User Manual page 208

WM Access Domain Services configuration
If admission control is enabled, you can configure the UL and DL policer action.
The UL and DL policers act as enforcement of a traffic management system. Depending on the
TSPEC negotiation per traffic class, Voice and Video, you can configure what actions the Altitude AP
takes when admitted traffic has violated its TSPEC.
You can configure the UL and DL policers per WM-AD
TSPEC statistics can be viewed in the Admission Control Statistics by Altitude AP display. For
more information, see
Step 7 - Apply Bandwidth Control Profile
Select the Bandwidth Control Profile that you want to apply to the WM-AD. The Bandwidth Control
Profiles ensure that no single user on any WM-AD is able to consume disproportionate amount of
bandwidth. For more information, see
To configure QoS Policy on a WM-AD:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration page is displayed.
2 In the left pane WM Access Domains list, click the WM-AD you want to configure for QoS.
3 Click the QoS Policy tab.
4 From the Wireless QoS list, do the following:
Legacy - Select if your WM-AD will support legacy devices that use SpectraLink Voice Protocol
(SVP) for prioritizing voice traffic. If selected, the Turbo Voice option is displayed.
WMM - Select to enable the AP to accept WMM client associations, and classify and prioritize the
downlink traffic for all WMM clients. Note that WMM clients will also classify and prioritize the
208
Chapter 10, "Working with reports and
"Creating Bandwidth Control profiles" on page
displays.".
152.
Summit WM User Guide, Software Version 5.3